10W COB LED Strip Light – 12V DC, 335 lm/ft (1100 lm/m), High CRI, Dot-Free Linear Tape Light

The 10W COB LED strip light is a 12V DC high-output linear lighting solution designed for continuous, dot-free illumination in demanding applications. Delivering 335 lm/ft (1100 lm/m) with a 120° beam angle, this COB LED strip provides uniform light without visible diode spotting. Engineered with chip-on-board (COB) technology, it ensures consistent brightness and enhanced visual comfort. Ideal for installation in aluminum channels, it supports efficient heat dissipation and clean light lines. With a high CRI (>90) and precise cut intervals, this strip is suited for architectural, display, and millwork lighting requiring higher lumen output.

Key Benefits

• High-output performance at 335 lm/ft (1100 lm/m) for brighter linear applications
• Continuous COB light source eliminates visible LED dots
• 12V DC system enables precise control for short-run installations
• High CRI (>90) improves color accuracy in professional environments
• Cuttable every 1 in (25 mm) for flexible, on-site customization
• Designed for aluminum channel integration to enhance thermal management
• Compatible with dimmable low-voltage LED drivers
• 65,000+ hour lifespan reduces maintenance requirements

Features

• Voltage: 12V DC
• Power Consumption: 3 W/ft (10 W/m)
• Lumen Output: 335 lm/ft (1100 lm/m)
• Color Temperatures: 2700K / 3000K / 4000K / 5000K
• Beam Angle: 120°
• CRI: >90
• LED Density: 146 LEDs/ft (480 LEDs/m)
• Cut Increment: 1 in (25 mm)
• Dimmable: Yes (with compatible 12V constant voltage drivers)
• IP Rating: IP22 (indoor use)
• Roll Length: 16.4 ft (5 m)
• Operating Temperature: -13°F to 140°F (-25°C to 60°C)
• Lifespan: 65,000+ hours
• Lead Wire: 24 in (600 mm) wire leads on both ends
• Certification: cULus Listed
• Warranty: 5-year limited warranty

Installation

Factory-applied double-sided 3M adhesive allows for direct mounting to clean, dry surfaces. For optimal heat dissipation and consistent light output, installation in aluminum LED channels is recommended. Designed for use with 12V DC constant voltage LED drivers, including dimmable power supplies. Ensure proper driver sizing and account for voltage drop in longer runs.

Applications

Architectural Linear Lighting | Under Cabinet Task Lighting | Millwork Integration | Retail Display | Cove Lighting | Hospitality Lighting | Gallery & Exhibit Lighting

Meta Description
10W 12V COB LED strip light, 335 lm/ft. High-output dot-free linear lighting for cove, millwork, display, and architectural applications.